ACCUMETRIC INC. -- RTV SILICONE ADHESIVE (AI 100 SILICONE)  -- 5970-01-099-1446
<pre>=====================  Product Identification  =====================

Product ID:RTV SILICONE ADHESIVE (AI 100 SILICONE)
MSDS Date:11/07/1994
FSC:5970
NIIN:01-099-1446
Status Code:A
=== Responsible Party ===
Company Name:ACCUMETRIC INC.
Address:350 RING ROAD
Box:843
City:ELIZABETHTOWN
State:KY
ZIP:42701
Country:US
Info Phone Num:502-769-3385
Emergency Phone Num:800-928-2677
Resp. Party Other MSDS Num.:P/N: DC-732 CLEAR
CAGE:58149
=== Contractor Identification ===
Company Name:ACCUMETRIC INC
Address:350 RING RD
Box:843
City:ELIZABETHTOWN
State:KY
ZIP:42701
Country:US
Phone:502-769-3385
CAGE:58149
Company Name:NESTOR SALES INC	DBA ACE TOOL CO
Address:7337 BRYAN DAIRY RD
Box:City:LARGO
State:FL
ZIP:33777
Country:US
Phone:727-544-6114
Contract Num:SP0400-99-A-AF30-0185
CAGE:1X015

=============  Composition/Information on Ingredients  =============

Ingred Name:METHYLTRIACETOXYSILANE
CAS:4253-34-3
RTECS #:VV4500000
= Wt:2.

Ingred Name:ETHYLTRIACETOXYSILANE
CAS:17689-77-9
= Wt:2.

Ingred Name:SILICA
CAS:7631-86-9
= Wt:10.
ACGIH TLV:10 MG/M3

Ingred Name:NON-HAZARDOUS INGREDIENT: POLYDIMETHYSILOXANE
= Wt:86.

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:NONE KNOWN.
Effects of Overexposure:INGESTION: MAY CAUSE STOMACH DISCOMFORT. SKIN
    CONTACT: UNCURED PRODUCT MAY IRRITATE LIPS, GUMS, TONGUE, AND SKIN.
    EYE CONTACT: UNCURED PRODUCT CONTACT IRRITATE EYES.
Medical Cond Aggravated by Exposure:NONE KNOWN.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES. OBTAIN MEDICAL
    ATTENTION. SKIN: WIPE OFF AND FLUSH WITH WATER. INHALATION: REMOVE
    TO FRESH AIR. OBTAIN MEDICAL ATTENTION. ORAL: OBTAIN MEDICAL
    ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:OC
Flash Point:=100.C, 212.F
Lower Limits:N/D
Upper Limits:N/D
Extinguishing Media:WATER, WATER FOG, CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS AND
    PROTECTIVE CLOTHING SHOULD BE WORN IN FIGHTING FIRES INVOLVING
    CHEMICALS.
Unusual Fire/Explosion Hazard:NONE KNOWN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE PRODUCT AND USE ABSORBENT MATERIAL TO
    TAKE CARE OF ANY OIL-LIKE RESIDUES.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE BELOW 90 F. USE REASONABLE CARE
    AND CAUTION.
Other Precautions:NONE KNOWN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:ACID GAS/ORGANIC VAPOR TYPE.
Ventilation:LOCAL: NONE. MECHANICAL: NONE.
Protective Gloves:CHEMICAL WORKERS GLOVES
Eye Protection:SAFETY GOGGLES WITH SIDE SHIELD.
Other Protective Equipment:NONE
Work Hygienic Practices:GROSS AMOUNT OF MATERIAL SHOULD BE REMOVED FROM
    THE SKIN AS SOON AS PRACTICAL, ESPECIALLY BEFORE EATING OR SMOKING.
Supplemental Safety and Health
PART NUMBER USED BY VENDOR: DC-732-CLEAR.

==================  Physical/Chemical Properties  ==================

HCC:N1
Vapor Pres:<5 MM
Spec Gravity:1.04
Evaporation Rate &amp; Reference:<1
Solubility in Water:<0.1%
Appearance and Odor:ACETIC ACID-LIKE PASTE

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL CAN CAUSE A REACTION.
Stability Condition to Avoid:AIR OR MOISTURE CAUSES POLYMERIZATION AND
    ACETIC ACID VAPORS ARE FORMED.
Hazardous Decomposition Products:SILICONE DIOXIDE, CARBON DIOXIDE, AND
    TRACES OF INCOMPLETELY BURNED CARBON PRODUCTS.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:REVIEW ALL LOCAL, STATE, AND FEDERAL REGULATIONS
    CONCERNING HEALTH AND POLLUTION TO DETERMINE APPROVED DISPOSAL
    METHOD.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.