CELESTE INDUSTRIES CORP -- 91% ISOPROPYL ALCOHOL, LB136  -- 6810-00N091802
<pre>=====================  Product Identification  =====================

Product ID:91% ISOPROPYL ALCOHOL, LB136
MSDS Date:09/28/1989
FSC:6810
NIIN:00N091802
Status Code:A
=== Responsible Party ===
Company Name:CELESTE INDUSTRIES CORP
Address:CLIFTON INDUSTRIAL PARK
Box:775
City:EASTON
State:MD
ZIP:21601
Country:US
Info Phone Num:301-822-5775
Emergency Phone Num:800-424-9300 (CHEMTREC)
Preparer's Name:F.S. BELL,III/J.D. TOOMEY
Chemtrec Ind/Phone:(800)424-9300
CAGE:18195
=== Contractor Identification ===
Company Name:CELESTE INDUSTRIES CORP
Address:7978 INDUSTRIAL PARK ROAD
Box:City:EASTON
State:MD
ZIP:21601
Country:US
Phone:410-822-5775
CAGE:18195

=============  Composition/Information on Ingredients  =============

Ingred Name:ISOPROPYL ALCOHOL
CAS:67-63-0
RTECS #:NT8050000
= Wt:91.
Other REC Limits:N/K 
OSHA PEL:980 MG/M3;400 PPM
OSHA STEL:N/K 
ACGIH TLV:983 MG/M3;400 PPM
ACGIH STEL:1230 MG/M3;500 PPM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: WILL INJURE EYE TISSUE IF NOT
    REMOVED PROMPTLY. COULD CAUSE STOPPAGE OF BREATHING AND DEATH IF
    INHALATION IS IN GREAT EXCESS. COULD CAUSE DEATH IF A LARGE AMOUNT
    IS INGESTED. WILL DEFAT SKIN. C HRONIC: COULD CAUSE DERMATITIS OR
    RESPIRATORY PROBLEMS ON CONTINUOUS LONG TERM SKIN CONTACT OR
    INHALATION.
Explanation of Carcinogenicity:NOT APPLICABLE.
Effects of Overexposure:REDNESS OF THE EYES, REDNESS OR CRACKING OF THE
    SKIN. HEADACHES, DIZZINESS, CHOKING OR COUGHING IF INHALED IN
    EXCESS OR SWALLOWED.
Medical Cond Aggravated by Exposure:EMPHYSEMA OR ASTHMA ARE AGGRAVATED
    BY VAPORS. DERMATITIS WILL BE GREATLY AGGRAVATED BY VAPORS OR
    LIQUID.

=======================  First Aid Measures  =======================

First Aid:INHALATION: OXYGEN FOR SEVERE INHALATION. EYES: IMMEDIATELY
    FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES.
    INGESTION: DO NOT INDUCE VOMITING. GET PROMPT MEDICAL ATTENTION.
    SKIN: FLUSH WITH  COPIOUS AMOUNTS OF WATER. SEE MD .

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:=16.1C, 61.F
Lower Limits:2.0%
Upper Limits:12.0%
Extinguishing Media:WATER SPRAY, ALCOHOL TYPE FOAM AND DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT . SHUT OFF FUEL TO FIRE. USE WATER SPRAY TO COOL
    FIRE-EXPOSED SURFACES. ALLOW FIRE TO BURN UNDER CONTROLLED
    CONDITIONS. EXTINGUISH WITH ALC OHOL TYPE FOAM AND DRY CHEMICAL.
Unusual Fire/Explosion Hazard:VAPORS FORM FLAMMABLE MIXTURES AT OR
    ABOVE FLASH POINT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE SOURCES OF IGNITION. PREVENT
    ADDITIONAL DISCHARGE OF MATERIAL. PREVENT LIQUID FROM ENTERING
    SEWERS OR WATER COURSES. CONTAIN SPILLED LIQUID WITH SAND, EARTH,
    OR ABSORBENT BOOMS. USE A VACUUM  TRUCK TO SUCK UP LARGE VOLUMES.

======================	Handling and Storage  ======================

Handling and Storage Precautions:USE PROPER GROUNDING PROCEDURE WHEN
    TRANSFERRING LIQUID AS WITH ANY FLAMMABLE LIQUID. STORE AND
    TRANSFER AT AMBIENT CONDITIONS.
Other Precautions:NONE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED RESPIRATORS MAY BE NECESSARY TO
    PREVENT OVEREXPOSURE.
Ventilation:LOCAL EXHAUST: USE EXPLOSION-PROOF VENTILATION EQUIPMENT.
    MECHANICAL (GENERAL): RECOMMENDED FOR CONFINED AREAS.
    SPECIAL/OTHER: NOT APPLICABLE.
Protective Gloves:CHEMICAL RESISTANT GLOVES (NITRILE/NEOPRENE).
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYEWASH AND DELUGE SHOWER MEETING ANSI
    DESIGN CRITERIA . LONG SLEEVES.
Work Hygienic Practices:REMOVE ANY ALCOHOL-WETTED CLOTHING IMMEDIATELY
    AND REPLACE WITH CLEAN AND DRY.
Supplemental Safety and Health
PHYSICAL/CHEMICAL PROPERTIES: VAPOR PRESSURE: 36.004 MM HG @ 68F,
    108.761 MM HG @ 100F; VAPOR DENSITY (AIR=1): 2.0 @ 1 ATM.

==================  Physical/Chemical Properties  ==================

Boiling Pt:>79.C, 174.1F
B.P. Text:174.2F - 177.8F
Melt/Freeze Pt:<-53.C, -63.4F
Vapor Pres:SUP DAT
Vapor Density:SUP DAT
Spec Gravity:0.82 @ 59.9F (H*O2=1)
Evaporation Rate &amp; Reference:1.9 (BUTYL ACETATE=1)
Solubility in Water:100% BY WEIGHT @ 68F
Appearance and Odor:COLORLESS LIQUID, WITH AN ALCOHOL ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
CAUSTICS, AMINES, ALKANOLAMINES, ALDEHYDES, AMMONIA, STRONG OXIDIZING
    AGENTS AND CHLORINATED COMPOUNDS.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:NONE.

=====================  Ecological Information  =====================

Ecological:OTHER INFORMATION: PHYSICAL/CHEMICAL PROPERTIES: % WATER
    VOLUME: 0%; WT/GAL: 6.7 LBS; VOC CONTENT: 800 G/L, CALCULATED @
    70F/21C, SCAQMD; NON-PHOTOCHEMICALLY REACTIVE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONSULT A WASTE DISPOSAL FIRM ON DISPOSAL OF
    RECOVERED MATERIAL. USE OF GLASS (POWDERED OR SPUN) BOOMS WILL
    ALLOW INCINERATION. DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
    FEDERAL REGULATIONS (FP  N).

===================  MSDS Transport Information  ===================

Transport Information:PROPER DOT SHIPPING NAME: MICA SHEET/PLATE. DOT
    HAZARD CLASSIFICATION: NONE.

=====================  Regulatory Information  =====================

SARA Title III Information:THE FOLLOWING CHEMICALS ARE SUBJECT TO THE
    REPORTING REQUIREMENTS OF 313 OF SARA TITLE III AND 40 CFR 372:
    METHYL ETHYL KETONE (MEK), METHYL ISOBUTYL KETONE (MIBK).
Federal Regulatory Information:ALL COMPONENTS ARE ON TSCA INVENTORY.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.